MII IG Kerndatensatz-Modul Molekulares Tumorboard
2027.0.0-ballot.1 - Germany

This page is part of the MII Implementation Guide Molecular Tumor Board (v2027.0.0-ballot.1: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Ressourcenprofil: MII PR MTB Therapieempfehlung Kombinationstherapie - Detaillierte Beschreibungen

Active Stand: 2026-09-15

Definitionen für das mii-pr-mtb-therapieempfehlung-kombination ressourcenprofil

Guidance on how to interpret the contents of this table can be foundhere

0. RequestGroup
Definition

A group of related requests that can be used to capture intended activities that have inter-dependencies such as "give this medication after that one".

ShortA group of related requests
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RequestGroup.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. RequestGroup.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.


A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

ShortProfiles this resource claims to conform to
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Control0..*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. RequestGroup.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. RequestGroup.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RequestGroup.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 10. RequestGroup.extension:Prioritaet
    Slice NamePrioritaet
    Definition

    Priorität der (einzelnen) Empfehlung

    ShortMII EX MTB Empfehlung Priorität
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(MII EX MTB Empfehlung Priorität) (Extension Type: Choice of: decimal, positiveInt)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. RequestGroup.extension:Evidenzgraduierung
    Slice NameEvidenzgraduierung
    Definition

    Evidenzgraduierung der (einzelnen) Empfehlung

    ShortMII EX MTB Empfehlung Evidenzgraduierung
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(MII EX MTB Empfehlung Evidenzgraduierung) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. RequestGroup.extension:Publikation
    Slice NamePublikation
    Definition

    Verweis auf Publikation der (einzelnen) Empfehlung

    ShortMII EX MTB Empfehlung Publikation
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(MII EX MTB Empfehlung Publikation) (Extension Type: Identifier)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. RequestGroup.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. RequestGroup.identifier
    Definition

    Allows a service to provide a unique, business identifier for the request.

    ShortBusiness identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Allows identification of the request as it is known by various participating systems and in a way that remains consistent across servers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. RequestGroup.status
    Definition

    Status der Umsetzung der Therapieempfehlung


    The current state of the request. For request groups, the status reflects the status of all the requests in the group.

    Shortdraft | active | on-hold | revoked | completed | entered-in-error | unknown
    Comments
    draft: Nicht umgesetzt,
    active: In Umsetzung,
    completed: Abgeschlossen oder abgebrochen (Patient verstorben)
    
    Control1..1
    BindingThe codes SHALL be taken from RequestStatushttp://hl7.org/fhir/ValueSet/request-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/request-status|4.0.1)

    Codes identifying the lifecycle stage of a request.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. RequestGroup.intent
    Definition

    Da das MTB nur Empfehlungen abgibt, wird hier typischerweise 'proposal' stehen. Es sei denn, diese Therapieempfehlung ist selbst nochmal Teil einer RequestGroup. In dem Fall muss hier 'option' stehen.


    Indicates the level of authority/intentionality associated with the request and where the request fits into the workflow chain.

    Shortproposal | optionproposal | plan | directive | order | original-order | reflex-order | filler-order | instance-order | option
    Control1..1
    BindingThe codes SHALL be taken from RequestIntenthttp://hl7.org/fhir/ValueSet/request-intent|4.0.1
    (required to http://hl7.org/fhir/ValueSet/request-intent|4.0.1)

    Codes indicating the degree of authority/intentionality associated with a request.

    Typecode
    Is Modifiertrue because This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Proposals/recommendations, plans and orders all use the same structure and can exist in the same fulfillment chain.

    Alternate Namescategory
    Pattern Valueproposal
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. RequestGroup.code
    Definition

    Classification of the therapy recommendation using oBDS therapy types (CH, HO, IM, ZS, etc.) to specify the kind of therapy being recommended.


    A code that identifies what the overall request group is.

    ShortType of therapy recommendationWhat's being requested/ordered
    Comments

    This element can be used to provide a code that captures the meaning of the request group as a whole, as opposed to the code of the action element, which captures the meaning of the individual actions within the request group.

    Control0..1
    BindingThe codes SHOULD be taken from For codes, see MII VS Onkologie Therapieempfehlung Typ
    (preferred to https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-therapieempfehlung-typ)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. RequestGroup.subject
    Definition

    The subject for which the request group was created.

    ShortWho the request group is about
    Control10..1
    TypeReference(Patient, Patient, Group)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. RequestGroup.encounter
    Definition

    Describes the context of the request group, if any.

    ShortCreated as part of
    Control0..1
    TypeReference(Encounter)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. RequestGroup.authoredOn
    Definition

    Indicates when the request group was created.

    ShortWhen the request group was authored
    Control10..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. RequestGroup.author
    Definition

    Provides a reference to the author of the request group.

    ShortDevice or practitioner that authored the request group
    Control0..1
    TypeReference(Practitioner, PractitionerRole, Device, Practitioner, PractitionerRole)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. RequestGroup.reasonReference
    Definition

    Indicates another resource whose existence justifies this request group.

    ShortWhy the request group is needed
    Control0..*
    TypeReference(MII PR Onkologie Diagnose Primärtumor, Condition, Observation, DiagnosticReport, DocumentReference)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. RequestGroup.action
    Definition

    The actions, if any, produced by the evaluation of the artifact.

    ShortProposed actions, if any
    Control10..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    rqg-1: Must have resource or action but not both (resource.exists() != action.exists())
    rqg-1: Must have resource or action but not both (resource.exists() != action.exists())
    38. RequestGroup.action.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    40. RequestGroup.action.code
    Definition

    Empfohlenes Therapieprotokoll gemäß Tumorkonferenz


    A code that provides meaning for the action or action group. For example, a section may have a LOINC code for a section of a documentation template.

    ShortEmpfohlenes TherapieprotokollCode representing the meaning of the action or sub-actions
    Control0..*
    BindingUnless not suitable, these codes SHALL be taken from For codes, see MII VS Onkologie Systemische Therapie Protokolle
    (extensible to https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-systemische-therapie-protokolle)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. RequestGroup.action.resource
    Definition

    The resource that is the target of the action (e.g. CommunicationRequest).

    ShortThe target of the action
    Comments

    The target resource SHALL be a Request resource with a Request.intent set to "option".


    The target resource SHALL be a Request resource with a Request.intent set to "option".

    Control10..1
    This element is affected by the following invariants: rqg-1
    TypeReference(MII PR MTB Therapieempfehlung Systemische Therapie, MedicationRequest, Resource)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. RequestGroup.action.action
    Definition

    For combination therapy protocols, each sub-action references an individual MedicationRequest with ATC/UNII coding


    Sub actions.

    ShortIndividual medications in protocolSub action
    Control0..0*
    This element is affected by the following invariants: rqg-1
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. RequestGroup
    2. RequestGroup.meta
    Must Supporttrue
    4. RequestGroup.extension
    SlicingThis element introduces a set of slices on RequestGroup.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. RequestGroup.extension:Prioritaet
      Slice NamePrioritaet
      Control0..1
      TypeExtension(MII EX MTB Empfehlung Priorität) (Extension Type: Choice of: decimal, positiveInt)
      Must Supporttrue
      8. RequestGroup.extension:Evidenzgraduierung
      Slice NameEvidenzgraduierung
      Control0..1
      TypeExtension(MII EX MTB Empfehlung Evidenzgraduierung) (Extension Type: CodeableConcept)
      Must Supporttrue
      10. RequestGroup.extension:Publikation
      Slice NamePublikation
      Control0..*
      TypeExtension(MII EX MTB Empfehlung Publikation) (Extension Type: Identifier)
      Must Supporttrue
      12. RequestGroup.status
      Definition

      Status der Umsetzung der Therapieempfehlung

      Comments
      draft: Nicht umgesetzt,
      active: In Umsetzung,
      completed: Abgeschlossen oder abgebrochen (Patient verstorben)
      
      14. RequestGroup.intent
      Definition

      Da das MTB nur Empfehlungen abgibt, wird hier typischerweise 'proposal' stehen. Es sei denn, diese Therapieempfehlung ist selbst nochmal Teil einer RequestGroup. In dem Fall muss hier 'option' stehen.

      Shortproposal | option
      16. RequestGroup.author
      TypeReference(Practitioner, PractitionerRole)
      18. RequestGroup.action
      Control1..?
      20. RequestGroup.action.resource
      Control1..?
      TypeReference(MII PR MTB Therapieempfehlung Systemische Therapie, MedicationRequest)
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      22. RequestGroup.action.action
      Control0..0

      Guidance on how to interpret the contents of this table can be foundhere

      0. RequestGroup
      Definition

      A group of related requests that can be used to capture intended activities that have inter-dependencies such as "give this medication after that one".

      ShortA group of related requests
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. RequestGroup.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. RequestGroup.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. RequestGroup.meta.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      8. RequestGroup.meta.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on RequestGroup.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 10. RequestGroup.meta.versionId
        Definition

        The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

        ShortVersion specific identifier
        Comments

        The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

        Control0..1
        Typeid
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. RequestGroup.meta.lastUpdated
        Definition

        When the resource last changed - e.g. when the version changed.

        ShortWhen the resource version last changed
        Comments

        This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. RequestGroup.meta.source
        Definition

        A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

        ShortIdentifies where the resource comes from
        Comments

        In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

        This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. RequestGroup.meta.profile
        Definition

        A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

        ShortProfiles this resource claims to conform to
        Comments

        It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

        Control0..*
        Typecanonical(StructureDefinition)
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. RequestGroup.meta.security
        Definition

        Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

        ShortSecurity Labels applied to this resource
        Comments

        The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from All Security Labels
        (extensible to http://hl7.org/fhir/ValueSet/security-labels|4.0.1)

        Security Labels from the Healthcare Privacy and Security Classification System.

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. RequestGroup.meta.tag
        Definition

        Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

        ShortTags applied to this resource
        Comments

        The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingFor example codes, see CommonTags
        (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

        Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. RequestGroup.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. RequestGroup.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. RequestGroup.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. RequestGroup.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        30. RequestGroup.extension
        Definition

        An Extension

        ShortExtension
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on RequestGroup.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 32. RequestGroup.extension:Prioritaet
          Slice NamePrioritaet
          Definition

          Priorität der (einzelnen) Empfehlung

          ShortMII EX MTB Empfehlung Priorität
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(MII EX MTB Empfehlung Priorität) (Extension Type: Choice of: decimal, positiveInt)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          34. RequestGroup.extension:Evidenzgraduierung
          Slice NameEvidenzgraduierung
          Definition

          Evidenzgraduierung der (einzelnen) Empfehlung

          ShortMII EX MTB Empfehlung Evidenzgraduierung
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(MII EX MTB Empfehlung Evidenzgraduierung) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          36. RequestGroup.extension:Publikation
          Slice NamePublikation
          Definition

          Verweis auf Publikation der (einzelnen) Empfehlung

          ShortMII EX MTB Empfehlung Publikation
          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension(MII EX MTB Empfehlung Publikation) (Extension Type: Identifier)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          38. RequestGroup.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Summaryfalse
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          40. RequestGroup.identifier
          Definition

          Allows a service to provide a unique, business identifier for the request.

          ShortBusiness identifier
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Allows identification of the request as it is known by various participating systems and in a way that remains consistent across servers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. RequestGroup.instantiatesCanonical
          Definition

          A canonical URL referencing a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this request.

          ShortInstantiates FHIR protocol or definition
          Control0..*
          Typecanonical
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. RequestGroup.instantiatesUri
          Definition

          A URL referencing an externally defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this request.

          ShortInstantiates external protocol or definition
          Control0..*
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. RequestGroup.basedOn
          Definition

          A plan, proposal or order that is fulfilled in whole or in part by this request.

          ShortFulfills plan, proposal, or order
          Control0..*
          TypeReference(Resource)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Allows tracing of authorization for the request and tracking whether proposals/recommendations were acted upon.

          Alternate Namesfulfills
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. RequestGroup.replaces
          Definition

          Completed or terminated request(s) whose function is taken by this new request.

          ShortRequest(s) replaced by this request
          Comments

          The replacement could be because the initial request was immediately rejected (due to an issue) or because the previous request was completed, but the need for the action described by the request remains ongoing.

          Control0..*
          TypeReference(Resource)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Allows tracing the continuation of a therapy or administrative process instantiated through multiple requests.

          Alternate Namessupersedes, prior, renewed order
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. RequestGroup.groupIdentifier
          Definition

          A shared identifier common to all requests that were authorized more or less simultaneously by a single author, representing the identifier of the requisition, prescription or similar form.

          ShortComposite request this is part of
          Comments

          Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Some business processes need to know if multiple items were ordered as part of the same "prescription" or "requisition" for billing or other purposes.

          Alternate Namesgrouperid, requisition
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. RequestGroup.status
          Definition

          Status der Umsetzung der Therapieempfehlung

          Comments
          draft: Nicht umgesetzt,
          active: In Umsetzung,
          completed: Abgeschlossen oder abgebrochen (Patient verstorben)
          
          Control1..1
          BindingThe codes SHALL be taken from RequestStatus
          (required to http://hl7.org/fhir/ValueSet/request-status|4.0.1)

          Codes identifying the lifecycle stage of a request.

          Typecode
          Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. RequestGroup.intent
          Definition

          Da das MTB nur Empfehlungen abgibt, wird hier typischerweise 'proposal' stehen. Es sei denn, diese Therapieempfehlung ist selbst nochmal Teil einer RequestGroup. In dem Fall muss hier 'option' stehen.

          Shortproposal | option
          Control1..1
          BindingThe codes SHALL be taken from RequestIntent
          (required to http://hl7.org/fhir/ValueSet/request-intent|4.0.1)

          Codes indicating the degree of authority/intentionality associated with a request.

          Typecode
          Is Modifiertrue because This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Proposals/recommendations, plans and orders all use the same structure and can exist in the same fulfillment chain.

          Alternate Namescategory
          Pattern Valueproposal
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. RequestGroup.priority
          Definition

          Indicates how quickly the request should be addressed with respect to other requests.

          Shortroutine | urgent | asap | stat
          Control0..1
          BindingThe codes SHALL be taken from RequestPriority
          (required to http://hl7.org/fhir/ValueSet/request-priority|4.0.1)

          Identifies the level of importance to be assigned to actioning the request.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Meaning if MissingIf missing, this request should be performed with normal priority
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. RequestGroup.code
          Definition

          Classification of the therapy recommendation using oBDS therapy types (CH, HO, IM, ZS, etc.) to specify the kind of therapy being recommended.

          ShortType of therapy recommendation
          Comments

          This element can be used to provide a code that captures the meaning of the request group as a whole, as opposed to the code of the action element, which captures the meaning of the individual actions within the request group.

          Control0..1
          BindingThe codes SHOULD be taken from MII VS Onkologie Therapieempfehlung Typ
          (preferred to https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-therapieempfehlung-typ)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. RequestGroup.subject
          Definition

          The subject for which the request group was created.

          ShortWho the request group is about
          Control1..1
          TypeReference(Patient)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. RequestGroup.encounter
          Definition

          Describes the context of the request group, if any.

          ShortCreated as part of
          Control0..1
          TypeReference(Encounter)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. RequestGroup.authoredOn
          Definition

          Indicates when the request group was created.

          ShortWhen the request group was authored
          Control1..1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. RequestGroup.author
          Definition

          Provides a reference to the author of the request group.

          ShortDevice or practitioner that authored the request group
          Control0..1
          TypeReference(Practitioner, PractitionerRole)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. RequestGroup.reasonCode
          Definition

          Describes the reason for the request group in coded or textual form.

          ShortWhy the request group is needed
          Control0..*
          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. RequestGroup.reasonReference
          Definition

          Indicates another resource whose existence justifies this request group.

          ShortWhy the request group is needed
          Control0..*
          TypeReference(MII PR Onkologie Diagnose Primärtumor)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. RequestGroup.note
          Definition

          Provides a mechanism to communicate additional information about the response.

          ShortAdditional notes about the response
          Control0..*
          TypeAnnotation
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. RequestGroup.action
          Definition

          The actions, if any, produced by the evaluation of the artifact.

          ShortProposed actions, if any
          Control1..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          rqg-1: Must have resource or action but not both (resource.exists() != action.exists())
          76. RequestGroup.action.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          78. RequestGroup.action.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          80. RequestGroup.action.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          82. RequestGroup.action.prefix
          Definition

          A user-visible prefix for the action.

          ShortUser-visible prefix for the action (e.g. 1. or A.)
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          84. RequestGroup.action.title
          Definition

          The title of the action displayed to a user.

          ShortUser-visible title
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          86. RequestGroup.action.description
          Definition

          A short description of the action used to provide a summary to display to the user.

          ShortShort description of the action
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. RequestGroup.action.textEquivalent
          Definition

          A text equivalent of the action to be performed. This provides a human-interpretable description of the action when the definition is consumed by a system that might not be capable of interpreting it dynamically.

          ShortStatic text equivalent of the action, used if the dynamic aspects cannot be interpreted by the receiving system
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. RequestGroup.action.priority
          Definition

          Indicates how quickly the action should be addressed with respect to other actions.

          Shortroutine | urgent | asap | stat
          Control0..1
          BindingThe codes SHALL be taken from RequestPriority
          (required to http://hl7.org/fhir/ValueSet/request-priority|4.0.1)

          Identifies the level of importance to be assigned to actioning the request.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          92. RequestGroup.action.code
          Definition

          Empfohlenes Therapieprotokoll gemäß Tumorkonferenz

          ShortEmpfohlenes Therapieprotokoll
          Control0..*
          BindingUnless not suitable, these codes SHALL be taken from MII VS Onkologie Systemische Therapie Protokolle
          (extensible to https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-systemische-therapie-protokolle)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          94. RequestGroup.action.documentation
          Definition

          Didactic or other informational resources associated with the action that can be provided to the CDS recipient. Information resources can include inline text commentary and links to web resources.

          ShortSupporting documentation for the intended performer of the action
          Control0..*
          TypeRelatedArtifact
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          96. RequestGroup.action.condition
          Definition

          An expression that describes applicability criteria, or start/stop conditions for the action.

          ShortWhether or not the action is applicable
          Comments

          When multiple conditions of the same kind are present, the effects are combined using AND semantics, so the overall condition is true only if all of the conditions are true.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          98. RequestGroup.action.condition.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          100. RequestGroup.action.condition.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          102. RequestGroup.action.condition.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          104. RequestGroup.action.condition.kind
          Definition

          The kind of condition.

          Shortapplicability | start | stop
          Comments

          Applicability criteria are used to determine immediate applicability when a plan definition is applied to a given context. Start and stop criteria are carried through application and used to describe enter/exit criteria for an action.

          Control1..1
          BindingThe codes SHALL be taken from ActionConditionKind
          (required to http://hl7.org/fhir/ValueSet/action-condition-kind|4.0.1)

          The kind of condition for the action.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          106. RequestGroup.action.condition.expression
          Definition

          An expression that returns true or false, indicating whether or not the condition is satisfied.

          ShortBoolean-valued expression
          Comments

          The expression may be inlined, or may be a reference to a named expression within a logic library referenced by the library element.

          Control0..1
          TypeExpression
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          108. RequestGroup.action.relatedAction
          Definition

          A relationship to another action such as "before" or "30-60 minutes after start of".

          ShortRelationship to another action
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          110. RequestGroup.action.relatedAction.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          112. RequestGroup.action.relatedAction.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          114. RequestGroup.action.relatedAction.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          116. RequestGroup.action.relatedAction.actionId
          Definition

          The element id of the action this is related to.

          ShortWhat action this is related to
          Control1..1
          Typeid
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          118. RequestGroup.action.relatedAction.relationship
          Definition

          The relationship of this action to the related action.

          Shortbefore-start | before | before-end | concurrent-with-start | concurrent | concurrent-with-end | after-start | after | after-end
          Control1..1
          BindingThe codes SHALL be taken from ActionRelationshipType
          (required to http://hl7.org/fhir/ValueSet/action-relationship-type|4.0.1)

          Defines the types of relationships between actions.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          120. RequestGroup.action.relatedAction.offset[x]
          Definition

          A duration or range of durations to apply to the relationship. For example, 30-60 minutes before.

          ShortTime offset for the relationship
          Control0..1
          TypeChoice of: Duration, Range
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          122. RequestGroup.action.timing[x]
          Definition

          An optional value describing when the action should be performed.

          ShortWhen the action should take place
          Control0..1
          TypeChoice of: dateTime, Age, Period, Duration, Range, Timing
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          124. RequestGroup.action.participant
          Definition

          The participant that should perform or be responsible for this action.

          ShortWho should perform the action
          Control0..*
          TypeReference(Patient, Practitioner, PractitionerRole, RelatedPerson, Device)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          126. RequestGroup.action.type
          Definition

          The type of action to perform (create, update, remove).

          Shortcreate | update | remove | fire-event
          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from ActionType
          (extensible to http://hl7.org/fhir/ValueSet/action-type|4.0.1)

          The type of action to be performed.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          128. RequestGroup.action.groupingBehavior
          Definition

          Defines the grouping behavior for the action and its children.

          Shortvisual-group | logical-group | sentence-group
          Control0..1
          BindingThe codes SHALL be taken from ActionGroupingBehavior
          (required to http://hl7.org/fhir/ValueSet/action-grouping-behavior|4.0.1)

          Defines organization behavior of a group.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          130. RequestGroup.action.selectionBehavior
          Definition

          Defines the selection behavior for the action and its children.

          Shortany | all | all-or-none | exactly-one | at-most-one | one-or-more
          Control0..1
          BindingThe codes SHALL be taken from ActionSelectionBehavior
          (required to http://hl7.org/fhir/ValueSet/action-selection-behavior|4.0.1)

          Defines selection behavior of a group.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          132. RequestGroup.action.requiredBehavior
          Definition

          Defines expectations around whether an action is required.

          Shortmust | could | must-unless-documented
          Control0..1
          BindingThe codes SHALL be taken from ActionRequiredBehavior
          (required to http://hl7.org/fhir/ValueSet/action-required-behavior|4.0.1)

          Defines expectations around whether an action or action group is required.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          134. RequestGroup.action.precheckBehavior
          Definition

          Defines whether the action should usually be preselected.

          Shortyes | no
          Control0..1
          BindingThe codes SHALL be taken from ActionPrecheckBehavior
          (required to http://hl7.org/fhir/ValueSet/action-precheck-behavior|4.0.1)

          Defines selection frequency behavior for an action or group.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          136. RequestGroup.action.cardinalityBehavior
          Definition

          Defines whether the action can be selected multiple times.

          Shortsingle | multiple
          Control0..1
          BindingThe codes SHALL be taken from ActionCardinalityBehavior
          (required to http://hl7.org/fhir/ValueSet/action-cardinality-behavior|4.0.1)

          Defines behavior for an action or a group for how many times that item may be repeated.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          138. RequestGroup.action.resource
          Definition

          The resource that is the target of the action (e.g. CommunicationRequest).

          ShortThe target of the action
          Comments

          The target resource SHALL be a Request resource with a Request.intent set to "option".

          Control1..1
          This element is affected by the following invariants: rqg-1
          TypeReference(MII PR MTB Therapieempfehlung Systemische Therapie, MedicationRequest)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          140. RequestGroup.action.action
          Definition

          For combination therapy protocols, each sub-action references an individual MedicationRequest with ATC/UNII coding

          ShortIndividual medications in protocol
          Control0..0
          This element is affected by the following invariants: rqg-1
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))